Home-In My OpinionProp Arcs and Complacency

Prop Arcs and Complacency

Many, many years ago when I was flying old Grumman S-2E Trackers off the USS Randolph then the USS Yorktown, there was a general policy that no one ever walked through the arc a propeller would make, even, of course, while the engine is not running (duh!).  

In 1970, I was in the US Navy Reserve flying the Lockheed P2-V Neptune out of NAS Millington just north of Memphis, TN. For our two weeks active duty time, the VP-67 squadron flew five P2-Vs to NAS Barbers Point, Hawaii. “Laxing” on the beach one Saturday, one of the sailors came up to me to ask if I would take an airplane over to another island for something. I told him that I could not, because I had already been indulging in a few cold adult beverages. He’d have to find another pilot. As it turned out, a skeleton crew was put together for the flight, which included our E-9, Leading Chief Smith (not his real name) as the crew chief. He was a PhD and the superintendent of education of a large city in Tennessee, a very intelligent and experienced crewman in P2-Vs.

An uneventful flight was made to the other island. On its return to the NAS, crew chief Smith exited the airplane as per his duty to inspect the bomb bay and wheel wells for hydraulic leaks. The engines of the Pratt &Whitney R-3350s with huge 14-foot diameter, four-blade props were still turning at 900 RPM. Chief Smith walked right through the prop arc of the portside engine, which promptly sent him all over the base. 

The moral of the story is obvious. It makes little difference how safety conscious you think you are. It is so easy for us to get complacent working around our ag-planes while the engine is turning. I bet the majority of you who have been in the business for at least a few years know of an instance or two where someone did get hit by a turning prop or almost did. So, In My Opinion, I think it would be a good idea to establish a policy for your ag flying service that no one ever walks through the arc of a propeller. Complacency around ag-airplanes may be the most insidious danger of all.

And so as per usual, be safe, have fun and make money. 

 

RELATED ARTICLES

CURRENT ISSUE

CLASSIFIEDS

  • 2013 Air Tractor 402B2013 Air Tractor 402B
    2013 Air Tractor 402B PT6A-15AG TTSN 1527.2 Prop TTSN 1527.2 Hot Section Inspection will be complete prior to sale Ready to spray, Satloc G4, IF1, Single Point Fuel, Reabe Contact Chris and 780-[...] Read more »
  • 2014 Air Tractor 402B2014 Air Tractor 402B
    Clean and well maintained AT-402B with PT6A-34AG Hot section inspection completed 2038.3. 2317.6 TTSN Prop TTSN 2317.6 Ready to spray, Satloc G4, IF1, Reabe, Single point fueling. Please contac[...] Read more »
  • PNW Journeymen Aerial ApplicatorsPNW Journeymen Aerial Applicators
    Bain Aviation, Inc., a family-owned company based at Weiser, ID since 1997, seeks Journeymen Commercial Pesticide Applicators for our AT602 and S2RG10 aircraft. Our well-maintained fleet is G4/Intelli[...] Read more »

Most Popular